5ST 500

5 x 20mm Glass Tube Type 5ST / 5STP Time-lag Fuse Series (Low Breaking Capacity) Electrical Characteristics (IEC-127-2 STANDARD SHEET 3) Rated Current 1.5 In 2.1 In 2.75 In MIN MAX MIN 1 2 200 1 2 hr. min. 63mA to 100mA 125mA and above Approvals 4 In 10 In MAX MIN MAX MIN MAX 10 40 600 10 150 ms sec ms 3 s Certificate No. 0045061 d License No. 85636 m Certificate No. EI261 r Recognized File No. E20624 S Acceptance File No. LR39772 Ampere Rating 5ST (P) 63 63mA Typical Volt-drop Melting I2T Melting I2T Cold @100% In < 10 mSec @10 In Resistance 2 (ohm) (Volt) max. (A Sec) (A2 Sec) 23.9 2.77 0.008 0.021 Maximum Power Dissipation (W) 0.28 5ST (P) 80 80mA 15.7 2.24 0.015 0.036 0.29 5ST (P) 100 100mA 10.3 1.82 0.03 0.06 0.30 5ST (P) 125 125mA 6.8 1.47 0.05 0.11 0.30 5ST (P) 160 160mA 4.4 1.19 0.08 0.19 0.31 5ST (P) 200 200mA 2.9 0.97 0.15 0.33 0.32 5ST (P) 250 250mA 1.9 0.78 0.26 0.58 0.32 10 300 3 20 300 5ST (P) 315 315mA 1.3 0.63 0.46 1.01 0.33 sec ms ms 5ST (P) 400 400mA 0.82 0.51 0.81 1.76 0.34 sdmrSc Safety Agency Approvals Catalog Number Amp range / Volt @ I.R. ability 63mA - 6.3A / 250V AC@ 35A or 10 In whichever is greater 63mA - 10A / 250V AC@ 35A or 10 In whichever is greater Operating Temperature -55ºC to +125ºC Physical Specification Materials Glass body / Nickel Plated Brass Caps Lead wire: Tin-lead plated Copper, Diameter 0.032", 6.3A and less Diameter 0.040", 8A and above Marking On fuse: “bel”, “T”, “Current Rating”, “L”, “250V” and “Appropriate Safety Logos” On label: Above info plus “5ST” or “5STP”, “c” and interrupting rating Packaging 1.In bulk: 5ST - 1,000 pcs per box; 5STP - 500 pcs per box 2. On Axial Tape & Reel: 1,500 pcs per reel 3. Tape & Reel specification: per EIA-296-E & IEC 286-1 @ 10mm Pitch and 63.5mm inside Tape Spacing 5ST (P) 500 500mA 0.54 0.42 1.4 3.1 0.34 5ST (P) 630 630mA 0.22 0.17 0.9 1.5 0.18 5ST (P) 800 800mA 0.15 0.15 1.6 2.5 0.20 1A 0.07 0.10 2.4 3.3 0.17 5ST (P) 1 5ST (P) 1.25 1.25A 0.06 0.09 4.1 5.5 0.19 5ST (P) 1.6 1.6A 0.04 0.09 6.9 8.9 0.23 2A 0.03 0.08 12 15 0.26 5ST (P) 2.5 5ST (P) 2 2.5A 0.02 0.07 20 24 0.31 5ST (P) 3.15 3.15A 0.018 0.07 33 39 0.36 5ST (P) 4 4A 0.014 0.06 56 64 0.42 5ST (P) 5 5A 0.011 0.06 95 105 0.49 6.3A 0.008 0.06 160 173 0.57 5ST (P) 8 5ST (P) 6.3 8A 0.006 0.06 260 282 0.8 5ST (P) 10 10A 0.005 0.06 439 461 1.0 Consult manufacturer for other ratings Mechanical Dimensions 0.787" ± 0.02" (20 ± 0.5mm) 0.20" ± 0.004" (5.1 ± 0.1mm) 0.827" ± 0.02" (21.0 ± 0.5mm) 0.217" ± 0.004" (5.5 ± 0.1mm) 5ST 1.5" ± 0.08" (38.1 ± 2mm) 5STP SEE LEAD SIZE LISTED IN “ MATERIAL” Specifications subject to change without notice 5STD0801 ORDERING INFORMATION SEE PAGES 67 & 68 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: belfuse@belfuse.com Website: www.belfuse.com 37 5 x 20mm Glass Tube Type 5ST / 5STP Time-lag Fuse Series (Low Breaking Capacity) 5STC0801 - 63mA - 80mA - 100mA - 125mA - 160mA - 200mA - 250mA - 315mA - 400mA - 500mA - 630mA - 800mA - 1A - 1.25A - 1.6A - 2A - 2.5A - 3.15A - 4A - 5A - 6.3A - 8A - 10A 5ST / 5STP - TIME CURRENT CHARACTERISTIC CURVE 10000 TIME IN SECONDS 1000 100 10 0.1 0.01 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES Specifications subject to change without notice 1 NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belfuse.com Website: www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K Tel: 44-1772-556601 Fax: 44-1772-888366 38